How to Use Air Tools for Beginners?

Air tools are handy devices used for a range of jobs in building, automotive and homes. Some of the common jobs involving the usage of an air tool include pumping up a bike, car, powering nail guns, blowing debris from construction sites and many other chores. Although using an air tool is not a big deal, an amateur may find it difficult how to use the tool. If you are one of these folks, follow the below advice.

How to use air tools for novices

An air tool works by drawing air and compressing it in a chamber for later usage. First of all, you need an air compressor. The compressor will compress and store the air in the tank. You will find compressors in various sizes. Make sure you take into account the horse power (HP), the delivery rate in cubic feet per minute, the capacity of the gas tank and how the compressor is powered (electric or gas). The delivery rate must match the tool’s flow rate demand to ensure uninterrupted supply of compressed air.

Next, you need a filter. A filter removes water and dust from the air. Both dust and water can damage the parts in addition to affecting the working efficiency of the machine. By doing away with water and dust, the filter lets you continue with your tool effectively. Also, filter act as a regulator while dispensing pressure. With proper adjustments, you can make certain that pressure is applied in the required quantity to dispense air from the tank.

Above all, you need a tank that will store the compressed air. The compressor is attached to the tank where the compressed air is stored. The larger the tank, the less portable the instrument will be. Depending on the amount of air you need, you have to choose the tank. For instance, a simple household work will require a smaller tank as opposed to a heavy duty painting work.

You will also need air hoses and fittings (to connect all the assemblies of the machine). One hose is needed to attach the compressor to the filter. Another hose is required to connect to the tool. The job of the hose is to pass air released from the tank.

How do air tools actually work/how to use the air tool


An instrument such as a nail gun uses a cylinder and piston arrangement similar to an internal combustion engine. The tank of the compressor is fitted with a pressure release valve for releasing excess pressure within the tank.

The air is actually driven by the motor. The motor drives the fan which pulls the air inside the tank. When the tank is filled with sufficient air, you are on the go to use the compressed air. Just attach the spray gun, nailer or another tool to the compressor and pull the trigger, and the air will be released. Don’t forget to put on goggles to protect your eyes from dust that might be blown and thrown by air pressure.

Air tools need a particular air pressure to work efficiently with 90 (pounds per square inch) PSI being the most common pressure. Depending on the extent and requirement of air, you can pull and stop the trigger to complete your work.

Once you have finished the work, turn off the motor. Make sure you release the balance compressed air before turning off. This will avoid accumulation of air pressure within the tank that could be dangerous. Also, drain out water from the tank.

Aside from this, check the working of the machine regularly. If you find any issue, get it fixed to avoid worsening of the problem. Also, lubricate the moving parts of the tool with a top quality lubricating oil. If you follow these simple rules and observe safety, you will be able to make the most out of the instrument with no issue.


Bottom line

The use of air tools is really helpful in accomplishing a wide variety of tasks for homeowners as well as professionals. However, it is important to get familiar with the usage to make the most out of the tool. If you lack information in this respect, read the above guidelines to use the air tool effectively for desired end purposes.

Useful resource: Air Compressor, Line Setup and How to Use Air Tools for Beginners

Leave a Reply

Your email address will not be published. Required fields are marked *